BevGuard BGE-3100S Water Filter Cartridge
• NSF Certified
• Flow rate of 3 GPM
• Polyphosphate scale inhibitor
• Micron rating of 5
• Prevents scale and lime buildup
• Removes silt, sand, rust
• Minimum water pressure of 25psi
• Maximum water pressure of 125psi
• Maximum temperature of 100 °F
- Prop 65 Warning
- Resources and Downloads
The water filtration cartridge contains a polypropylene block that reduces dissolved solids, unwanted particles, sediments, silt and sand present in the water. It is designed to be used with the water filters of non-carbonated beverage equipment; this cartridge does not remove beneficial minerals.
With a polyphosphate scale inhibitor, the BevGuard BGE-3100S filtration cartridge reduces the accumulation of scale and lime on the internal parts of the machines. It helps in increasing the serviceable life of the machines by reducing the maintenance and repair frequency. With a micron rating of 5, the mineral reduction cartridge removes the smallest of contaminants.
The BevGuard filtration cartridge has a flow rate of 3 GPM that ensures an uninterrupted supply of clean water. This replacement cartridge requires a minimum of 25psi water pressure and endures a maximum water pressure of 125 psi. It can withstand a maximum of 100°F operating temperature. The scale reduction cartridge should not be used with microbiologically unsafe water or with water of unknown quality.
16 1/2″ x 3 3/16″ (41.90 cm x 8.1 cm)
Min Operating Pressure:
25 psi (1.7 bar)
Max Operating Pressure:
125 psi – (8.6 bar)
35-100°F (1.7°C – 38°C)
3 gpm (11.35 lpm)